Installing 5.25" Device; Installing Internal 3.5" Device - Thermaltake Shark User Manual

2.3 Installing 5.25" Device

2
1
5
Remove the front bezel by
grasping it at the bottom
right corner and swinging
outward.
1
After removing the bezel,
drive rails will be located
behind the bezel just
removed.
2
Mount two drive rails onto
the side of 5.25" device.
Be sure the tab from the
rail angles out away and
faces toward the front of
the device.
3
Insert the railed device
into the 5.25" drive bay
then slide it along the
fixed-positioning rack
inside the 5.25" cage.
4
2.4 Installing 3.5" Device
Remove the tray show in the
picture by squeeze the clip
on each side of the tray and
slide the tray out.
1
Mount your HDD or other
internal 3.5" device into
drive tray. Then tighten the
device by the screws
provided.
2
Slide the tray back into the cage.
3
User's Maunal
6