Download Print this page

Omron M10-IT Instruction Manual: Taking A Reading

Digital automatic blood pressure monitor.
Hide thumbs

Advertisement

HEM-7080IT-E.book 21 ページ 2011年11月14日 月曜日 午後1時53分
3.3

Taking a Reading

The unit is designed to take measurements and store the
measurement values in the memory for two people using user ID A and
user ID B.
The unit can also be used to take a single measurement for other
persons using the guest mode. The user ID symbol is not displayed
when using the guest mode. Measurements taken using the guest
mode are not stored in the memory.
Using the Guest Mode
1.
Press and hold the O/I START button until the A and B user
symbols disappear from the display.
2.
Release the O/I START button.
The cuff starts to inflate automatically.
Note: To stop the inflation press and release the O/I START
button. The unit will stop inflating, start deflation and turn
off.
3.
Inflation stops and the measurement is started. When the
measurement is completed, your blood pressure and pulse rate
appear on the display.
Press for at least 3 seconds
3. Using the Unit
A and B display
goes out
21
EN

Advertisement

   Related Manuals for Omron M10-IT

Comments to this Manuals

Symbols: 0
Latest comments: