Ford Ranger Owner's Handbook Manual page 82

5. Insert the lock.
6. Insert the key in the lock and turn it
clockwise.
7. Remove the key.
8. Install the protection cap.
Driving with a trailer
E78800
WARNING
If any of the following conditions
cannot be met, do not use the tow
bar and have it inspected by
properly trained technicians.
Before starting your journey, make sure
that the tow ball arm is properly locked.
Check that:
• The tow ball is correctly locked.
• The protection cap is correctly fitted.
• The tow ball arm is fully engaged in its
seat.
Towing
Removing the tow ball arm
E78804
1. Remove the protection cap.
2. Insert the key and turn it
anti-clockwise.
3. Remove the lock.
4. Push the lever to the left and hold it.
5. Push the lever fully forwards until the
tow ball arm is unlocked.
6. Remove the tow ball arm.
7. Install the protection cap.
8. Install the plug in the seat.
Driving without a trailer
1. Remove the tow ball arm.
2. Install the plug into its seat.
To avoid risk of injury, never unlock
the tow ball arm with the trailer
attached.
80
WARNING