Cleaning The Pump - Electrolux EWF12932 User Manual

Hide thumbs Also See for EWF12932:
Table of Contents

Advertisement

Available languages

Available languages

24
www.electrolux.com

8.7 Cleaning The Pump

Regularly examine the drain pump
and make sure that it is clean.
Clean the pump if:
The appliance does not drain the
water.
The drum cannot turn.
The appliance makes an unusual
noise because of the blockage of
the drain pump.
The display shows an alarm code
because of the problem with
water drain.
WARNING!
1. Disconnect the mains plug
2. Do not remove the filter while
To clean the drain pump:
1.
Open the drain pump door.
2.
Pull the flap down, then squeeze
the legs on both sides of the cover
together and pull out (as picture).
from the mains socket.
the appliance operates. Do
not clean the drain pump if
the water in the appliance is
hot. The water must be cold
before you clean the drain
pump.
2
pull out
3.
Place a suitable water container
below the recess of the drain pump
to collect the water that flows out.
Press the two levers and pull
forward the drainage duct to let the
water flow out.
1
squeeze
the legs
on both
sides

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents