Starting A Program - Electrolux EWF12932 User Manual

16 www.electrolux.com
2. Measure Out The Detergent And The Fabric Softener
Step 4 - Starting a program
-
Pull out the dispenser drawer
until it stops.
-
Measure out the amount of
detergent required, pour it into
the main wash compartment
( ) and, if you wish to carry
out the "Prewash" phase,
pour it into the compartment
marked .
-
If required, pour fabric softener
into the compartment marked
(the amount used must not
exceed the "MAX" mark in the
drawer).
To start a program, press the
Start/Pause ( ) touchpad, the
corresponding pilot light will stop
flashing and a default program
duration will be displayed on the
screen.
After approx. 15 minutes
from the start of a program:
- The appliance will automatically
adjust the selected program
duration according to the type
and size of the load.
If you use thick softeners it
is recommended to dilute
with water.
-
Close the drawer gently.
After washing cycle
finish, residues of
detergent, softener and
water may remain in the
dispenser.
It is recommended to
clean the dispenser
regularly to remove any
residue.
-
The display will show adjusted
program duration.
ATTENTION !
If you turn the program selector
dial to another program when the
machine is working, the message
" " will appear on the
display to indicate a wrong
selection. The machine will not
perform the new selected
program.