Notes On Soldering; Safety Instructions; Accessories; Items Supplied - Weller WSS 80 Operating Instructions Manual

Set the required temperature on the rotary potentiometer (3) and switch on the unit at the
mains switch (1). At the end of the necessary warm-up time, wet the soldering iron bit with
solder.

3. Notes on Soldering

Never operate the soldering iron without a bit, otherwise the heater element and the
temperature sensor will be damaged.
During breaks in soldering and prior to placing the soldering iron in the holder, always ensure
that the soldering iron bit is well tinned. Use the correct flux. For lead profile flux paste, and
for copper foil liquid flux. Do not use excessively aggressive fluxes.
To put down the hot soldering iron, always use the safety holder provided.
Any mechanical working of the soldering iron bit destroys the galvanic protective coating
and drastically reduces the life of the soldering iron bit.
The Soldering Station has been set up for a medium soldering iron bit. Temperature variations
due to a change of bit, or due to the use of other shape bits can occur.

4. Safety Instructions

No liability for usage other than that in the operating instructions or for unauthorised
modifications is accepted by the manufacturer.
These operating instructions and the warning notes contained therein are to be read carefully
and stored near the Soldering Station such that they are clearly visible. Failure to observe the
warning notes can lead to accidents and injury, or damage to the health.
The WELLER WSS80 Soldering Station complies with the EC declaration of conformity in
accordance with the basic safety requirements in the directives 89/336/EWG and 73/23/
EWG.

5. Accessories

Soldering tips SG 80 45° chamfer (supplied)
Soldering tips SG 81 35° chamfer
WSS80.1 21
PK Elektronik Vertriebs GmbH, E-Mail: info@pkelektronik.com, Internet: www.pkelektronik.com
Soldering tips SG 82 chisel-shape 5mm
See page 44

6. Items Supplied

WSS80 Control Unit
WH80 Soldering Iron
Safety holder
Operating instructions

7. Warnings

1. Keep your work area in proper order.
Always return the soldering tool to its original holder when not in use. Do not bring combustible
materials near the hot soldering tools.
2. Take care for the surroundings.
Don't use the soldering tool in a moist or wet environment.
3. Protect yourself against electrical shocks.
Avoid touching grounded parts with your body, e.g. pipes, heating radiators, stoves,
refrigerators.
4. Keep children at a distance.
Don't allow other persons to touch or disturb the soldering tool or cord. Keep other persons
away from your work area.
5. Store your soldering tool in an appropriate place
Unused soldering tools should be stored in a dry location which is out of the reach of children
(some place high or in a locked cabinet). Switch off all unused soldering tools.
6. Do not overload your soldering tool.
Use the soldering tool only with the specified voltage or specified pressure and pressure
range.
08.04.2003, 14:15 Uhr
21