Control Page - BenQ DX550 User Manual Manual

Resize
H. Phase
H. Size
H.Position
V. Position
Image Ratio
System
Color
Tint
*Tint may not be adjusted with PAL/SECAM video signal input.
C. Control Page
When users go into the Control sub-page, the first item "Auto" will be highlighted. There are five
items on this page: Reset, Language, Mirror, Auto Off and Reset (Fig. 26).
Figure 26 Control sub-page
Downloaded From projector-manual.com BenQ Manuals
When Resize is 4:3 or 16:9, the projector determines the best fit of the image to
the screen.
If flicker occurs on a projected image, users may try to adjust the H. Phase
manually.
If the projected image is too wide or too narrow for the screen, users may turn
Auto Image off and adjust the H. Size manually to fit the screen size.
(move the image left)
The Auto Image should be turned off to activate the H. Position item. Position
adjustments are saved when the projector is power off.
(move the image down)
Position adjustments are saved when the projector is power off.
4:3 (Normal)
To select the input video system standard. When an AV box or turner box is
attached, the projector will automatically detect the video system.
(Less)
(Red)
Setting effects
16:9 (Wide)
(More)
(Green)
Figure 27 Language selection
User's Manual
(move the image right)
(move the image up)
Source is Video or S-
Video.
Operation 17