Tip Tool Proper Use (3.9 Mm Only) - GE XL VU Operating Manual

Tip Tool Proper Use (3.9 mm only)

Removing Tips
1. Apply empty tip tool to probe head.
2. Apply pressure while turning in the counter-clockwise position.
3. When tip tool spins freely, gently pull up while twisting in the
counter-clockwise position to release the second set of threads.
4. Remove tip tool and tip will be within.
Applying Tips
1. Apply tip tool containing appropriate tip to probe head.
2. Apply pressure while turning in the clockwise position.
3. When tip tool spins freely, gently push down while twisting in the
clockwise position to engage the second set of threads.
4. Pull gently on tip tool to ensure proper attachment.
5. Remove tip tool and tip will be attached to probe head.
NOTE: Never use excessive force to install or remove an optical tip.
®
XL Vu™ VideoProbe
Getting Started
27