Table of Contents
Advertisement
Quick Links
NOTICE
It is the Purchaser's/Owner's obligation:
1. To disclose and post all Rules & Regulations, Danger, Warning and Caution
labels affixed on the machine to their customers/users.
2. Equipment to be installed by TFI Authorized Dealer or a service
company approved by TFI.
3. Provide trained personnel, supervision and correct usage of the equipment.
4. Provide scheduled inspection, maintenance & repairs and must be performed
by TFI Authorized Dealer or a service company approved by TFI.
5. Must use only genuine TFI replacement parts.
6.
Machine must be anchored to a solid and level surface.
TUFFSTUFF FITNESS INTERNATIONAL
OWNER'S MANUAL
Maintenance & Assembly Instructions
IMPORTANT: KEEP THIS MANUAL FOR FUTURE REFERENCE
CG-9503
Multi-Press
CG-9503 Rev0
Revision Date 10-27-2015
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for TuffStuff CG-9503
Summary of Contents for TuffStuff CG-9503
- Page 1 TUFFSTUFF FITNESS INTERNATIONAL OWNER’S MANUAL Maintenance & Assembly Instructions IMPORTANT: KEEP THIS MANUAL FOR FUTURE REFERENCE NOTICE CG-9503 It is the Purchaser’s/Owner’s obligation: 1. To disclose and post all Rules & Regulations, Danger, Warning and Caution Multi-Press labels affixed on the machine to their customers/users.
-
Page 2: Table Of Contents
Should additional information be required, or should situations arise that are not covered by this owner’s manual, the matter should be directed to Customer Service at TuffStuff Fitness International Inc. in Chino, California. -
Page 3: Overhead Specifications
Overhead Specifications L 73” X W 59” X H 59” MAX-LOAD WEIGHT LIMIT -200 lbs CG-9503 MULTI-PRESS www.tuffstuffitness.com... - Page 4 SIZE DATE MATERIAL REV. FRACTIONAL 1/64 REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF 8/13/2015 DECIMAL TUFFSTUFF FITNESS INTERNATIONAL IS PROHIBITED. METRIC .5080 DRAWN BY: TUFFSTUFF FITNESS SCALE FINISH SHEET L. VIDARTE 1 OF 1 INTERNATIONAL...
- Page 5 Carefully read ALL Danger, Warning & Caution labels posted on the machine CG-9503 MULTI-PRESS www.tuffstuffitness.com...
- Page 6 Carefully read ALL Danger, Warning & Caution labels posted on the machine WARNING Keep body, hands and fingers clear of all moving parts. BNH2926 2-5/8 x 1 inches PMS 152 www.tuffstuffitness.com CG-9503 MULTI-PRESS...
- Page 7 You should have received it along with this Owner’s Manual� If you did not receive this Facility Sign with your order, you can obtain one at no cost to you from TuffStuff Fitness by contacting our service department at: 1 (888) 884-8275 service@tuffstuff�net...
-
Page 8: Anchoring Unit
Anchoring Unit Holes on frame are provided for anchoring the unit to the floor� See anchoring hole location below� www.tuffstuffitness.com CG-9503 MULTI-PRESS... -
Page 9: Important Safety Instructions
Always warm-up before and cool-down after weight training. 11. Use only genuine TuffStuff replacement parts. Failure to do so will Warm-up for 10-15 minutes with stretching and cardiovascular void warranty and could result in serious injury or death to the users. -
Page 10: Registration, Service & Assembly
Thank you for purchasing the CG-9503 Multi-Press. This machine is part of the TuffStuff line of quality strength training equipment. To maximize your use of the equipment, please study the Owner’s Manual thoroughly. Allow ample space around the machine for safe unrestricted use and Registration easier access. -
Page 11: Inspection/Maintenance
Professional Service Company approved by TFI. Keep a service log of all maintenance and repair activities. Extra copies can be downloaded from our website www.tuffstuffitness.com INSPECTION / MAINTENANCE RECORDS DATE REPLACEMENT REPAIRS INSPECTED BY WARRANTY REPAIRS DATE REPLACEMENT REPAIRS INSPECTED BY CG-9503 MULTI-PRESS www.tuffstuffitness.com... -
Page 12: Cable Inspection
A BREAK ON THE CABLE CABLE END SLIPPING OUT IMPORTANT NOTE: DAMAGED OR WORN CABLE (AS SHOWN ABOVE) MAY DAMAGE THE PULLEY(S)� YOU MUST INSPECT THE PULLEYS AT THIS TIME FOR WEAR AND TEAR� REPLACE IF NEEDED� www.tuffstuffitness.com CG-9503 MULTI-PRESS... -
Page 13: Step
HEX HEAD CAP SCREW GR-5 Z/P 3/8-16 X 3 HEX HEAD CAP SCREW GR-5 Z/P 3/8-16 X 5 NYLON INSERT THIN PATTERN LOCK NUT Z/P 3/8-16 SPLIT LOCK WASHER Z/P 3/8” Fully Tighten 100% Fully Tighten Wrench tighten all hardware in this step. CG-9503 MULTI-PRESS www.tuffstuffitness.com... -
Page 14: Step
HEX HEAD CAP SCREW GR-5 Z/P 3/8-16 X 3 HEX HEAD CAP SCREW GR-5 Z/P 3/8-16 X 3 1/2 NYLON INSERT THIN PATTERN LOCK NUT Z/P 3/8-16 Fully Tighten 100% Fully Tighten Wrench tighten all hardware in this step. www.tuffstuffitness.com CG-9503 MULTI-PRESS... -
Page 15: Step
HEX HEAD CAP SCREW GR-5 Z/P 1/2-13 X 5 1/4 HEX HEAD CAP SCREW GR-5 Z/P 1/2-13 X 5 3/4 NYLON INSERT THIN PATTERN LOCK NUT Z/P 1/2-13 Fully Tighten 100% Fully Tighten Wrench tighten all hardware in this step. CG-9503 MULTI-PRESS www.tuffstuffitness.com... -
Page 16: Step
Step 4 Fully Tighten 100% Fully Tighten Wrench tighten all hardware in this step. www.tuffstuffitness.com CG-9503 MULTI-PRESS... -
Page 17: Step
Description Qty. PIVOT AXLE 1 RD X 5 3/4 PRESS BAR FLAT WASHER 3/8 ID X 1 1/2 OD X 3/16 THICK HEX HEAD CAP SCREW GR-5 Z/P 3/8-16 X 1 1/4 SPLIT LOCK WASHER Z/P 3/8” CG-9503 MULTI-PRESS www.tuffstuffitness.com... -
Page 18: Step
Step 5 Fully Tighten 100% Fully Tighten Wrench tighten all hardware in this step. www.tuffstuffitness.com CG-9503 MULTI-PRESS... -
Page 19: Step
8� Open the lube package provided and apply a thin film of lubricant around the first 3 inches of the guide rods above the top plate� 9� After the cables are installed, do a set of reps to spread the lubricant thoroughly� CG-9503 MULTI-PRESS www.tuffstuffitness.com... -
Page 20: Step 6 Cable Routing
Step 6 Cable Routing Fully Tighten 100% Fully Tighten Wrench tighten all hardware in this step. www.tuffstuffitness.com CG-9503 MULTI-PRESS... - Page 21 MULTI-PRESS CABLE BLACK NYLON BUMPER FINISHED HEX NUT B-Z/P 1/2-13 NYLON INSERT LOCK NUT Z/P 5/16-18 SHOULDER BOLT Z/P 3/8 X 3/4 SPLIT BOLT GR-8 Z/P 1/2-13 X 3 1/2 (RND CUT) SPLIT LOCK WASHER Z/P 1/2” CG-9503 MULTI-PRESS www.tuffstuffitness.com...
-
Page 22: Step
Step 7 Assembly List Item # Description Qty. WEIGHT SHIELD FRONT FLAT HEAD SOCKET CAP SCREW Z/P M6-1.0 X 50 WEIGHT SHIELD REAR PLASTIC SHROUD LID Fully Tighten 100% Fully Tighten Wrench tighten all hardware in this step. www.tuffstuffitness.com CG-9503 MULTI-PRESS... -
Page 23: Step
FLAT WASHER SAE Z/P 3/8” HEX HEAD CAP SCREW GR-5 Z/P 3/8-16 X 1 1/4 RUBBER BUMPER W/WASHER 3/8 X 1 1/2 SPLIT LOCK WASHER Z/P 3/8” Fully Tighten 100% Fully Tighten Wrench tighten all hardware in this step. CG-9503 MULTI-PRESS www.tuffstuffitness.com... -
Page 24: Parts List
LABEL‐WARNING KEEP BODY, HANDS... HEX KEY ALLOY 1/4ʺ HEX HEAD CAP SCREW GR‐5 Z/P 3/8‐16 X 5 BNH2051 HEX KEY ALLOY 3/32ʺ BNH0372 PRE ASSEMBLED COMPONENTS Item No. Description Rev. Part No. Qty. Item No. Description Rev. Part No. Qty. BACK PAD BRACKET SUPPORT BAR UP8480X1 UP8492X1 CARRIAGE UP8490X1 WEIGHT SHIELD FRONT UP8468X1 FRONT FRAME UP8482X1 WEIGHT STACK FRAME UP8470X1 UP8483X1 PLASTIC SHROUD LID MAIN FRAME BNH3393X1 PRESS BAR UP8486X1 www.tuffstuffitness.com CG-9503 MULTI-PRESS... -
Page 25: Pre-Assembled Components
Pre-Assembled Components *19 UP8470X1 *58 BNH3393X1 28 39 *2 UP8480X1 *5 UP8482X1 *4 UP8490X1 CG-9503 MULTI-PRESS www.tuffstuffitness.com... -
Page 26: Pre-Assembled Components
Pre-Assembled Components 57 39 20 75 39 *10 UP8486X1 *16 UP8492X1 72 22 68 33 *7 UP8483X1 *17 UP8468X1 46 39 www.tuffstuffitness.com CG-9503 MULTI-PRESS... -
Page 27: Notes
Notes CG-9503 MULTI-PRESS www.tuffstuffitness.com...
Need help?
Do you have a question about the CG-9503 and is the answer not in the manual?
Questions and answers