The Captain's Seat; Adjusting The Armrest Width; Adjusting The Armrest Angle; Adjusting The Armrest Height - Invacare Pronto M61 User Manual

Invacare® Pronto™ M61 Series with SureStep®
1. Loosen the clamping lever A.
2. Shift the remote forwards or backwards to the desired distance.
3. Retighten the clamping lever.

5.3 The Captain's seat

5.3.1 Adjusting the armrest width

1. Loosen the two lock knobs A that secure the arms C to the
arm support tube B.
•
Both arms should be adjusted to the same distance
away from the arm support tube.
•
Changing the width of the arms may also affect the
overall width of the wheelchair.
2. Reposition the arms until desired width is achieved.
3. Securely tighten the two lock knobs that secure the arms to
the arm support tube.

5.3.2 Adjusting the armrest angle

CAUTION!
Pinch point may occur when adjusting the arm
angle
– Pay attention to your fingers.
24
Tools:
•
1/2" open-ended spanner
1. Lift up the armrest.
Loosen the jam nut A.
2.
Adjust the socket screw B up or down to the desired arm angle
3.
position.
4. Tighten the jam nut.
5. To determine the same angle for the opposite armrest, count
the exposed threads after the jam nut has been tightened.
6. Repeat STEPS 1-4 for opposite armrest, if necessary.

5.3.3 Adjusting the armrest height

1590425-A