The Captain's Seat; Adjusting The Armrest Width; Adjusting The Armrest Angle - Invacare Pronto M41 Series User Manual

1. On both sides, loosen and remove the upper backrest
screw A.
2. Set the required backrest angle in 3.8° steps.
Use scale B on the backrest for this purpose. Ensure
that you set the same angle on both sides.
3. Re-insert and tighten the screw.
Ensure you insert the screw through one of the holes
of the backrest bracket. The screw must be visible on
the inside of the bracket and the screw head must be
flush with the bracket.
Simple backrest
• 6 mm Allen key
1. On both sides, loosen and remove the middle backrest
screw A.
2. Set the required backrest angle in 7.5° steps.
Ensure that you set the same angle on both sides.
3. Re-insert and tighten the screw.
1553378-G

5.6 The Captain's seat

5.6.1 Adjusting the armrest width

1. Loosen the two lock knobs A that secure the arms C
to the arm support tube B.
• Both arms should be adjusted to the same
distance away from the arm support tube.
• Changing the width of the arms may also
affect the overall width of the wheelchair.
2. Reposition the arms until desired width is achieved.
3. Securely tighten the two lock knobs that secure the
arms to the arm support tube.

5.6.2 Adjusting the armrest angle

CAUTION!
Pinch point may occur when adjusting the arm
angle
– Pay attention to your fingers.
• 1/2" open-ended wrench
Setup
45