Invacare Pronto M61 User Manual page 64

Invacare® Pronto™ M61 Series with SureStep®
Component weights
Base
Seat unit
Batteries
Payload
Max. payload
Axle loads
Max. front axle load
Max. center axle load
Max. rear axle load
1 IPX4 classification means that the electrical system is protected against spray water.
2 Static stability according to ISO 7176-1 = 9° (15.8 %)
Dynamic stability according to ISO 7176-2 = 6° (10.5 %)
3 Note: The drive range of a mobility device is strongly influenced by external factors, such as the speed setting of the wheelchair,
the charging state of the batteries, surrounding temperature, local topography, road surface characteristics, tire pressure, weight of
user, drive style and use of batteries for lighting, servos etc.
The specified values are theoretical maximum achievable values measured according to ISO 7176-4.
4 Measured without seat cushion
5 Distance between backrest reference plane and most forward part of armrest assembly
6 Horizontal distance of wheel axle from intersection of loaded seat and backrest reference planes
7
The actual curb weight depends on the fittings your mobility device has been supplied with. Every Invacare mobility device is weighed
when leaving the works. Refer to the nameplate for the curb weight (including batteries) measured.
64
•
approx. 60 kg
•
approx. 16 — 19 kg
•
approx. 11 kg per battery
•
136 kg
•
50 kg
•
100 kg
•
75 kg
1590425-A