Energy Saving Control Function; Low Power Mode - Kyocera ECOSYS P2135dn Operation Manual

Energy Saving Control Function

The device comes equipped with a Low Power Mode where energy
consumption is reduced after a certain amount of time elapses since the
device was last used, as well as a Sleep where printer functions remain
in a waiting state but power consumption is still reduced to a minimum
when there is no activity with the device within a set amount of time.

Low Power Mode

The device automatically enters Low Power Mode when 1 minute has
passed since the device was last used. The amount of time of no activity
that must pass before Low Power Mode is activated may be lengthened.
For more information refer to Low Power Timer (Low Power Mode timer
timeout time) section of the Advanced Operation Guide.
Sleep
For Europe
The device automatically enters Sleep when 15 minutes have passed
since the device was last used. The amount of time of no activity that
must pass before Sleep is activated may be lengthened. For more
information, refer to Sleep Timer (Sleep timer timeout setting) section of
the Advanced Operation Guide.
Except for Europe
The device automatically enters Sleep when 1 minute has passed since
the device was last used. The amount of time of no activity that must
pass before Sleep is activated may be lengthened. For more information,
refer to Sleep Timer (Sleep timer timeout setting) section of the
Advanced Operation Guide.
Automatic 2-Sided Print Function
This device includes 2-sided printing as a standard function. For
example, by printing two 1-sided originals onto a single sheet of paper as
a 2-sided print, it is possible to lower the amount of paper used. For
more information refer to Duplex (Duplex Printing) section of the
Advanced Operation Guide.
Printing in duplex mode reduces paper consumption and contributes to
the conservation of forest resources. Duplex mode also reduces the
amount of paper that must be purchased, and thereby reduces cost. It is
recommended that machines capable of duplex printing be set to use
duplex mode by default.
Resource Saving - Paper
For the preservation and sustainable use of forest resources, it is
recommended that recycled as well as virgin paper certified under
environmental stewardship initiatives or carrying recognised ecolabels,
which meet EN 12281:2002*1 or an equivalent quality standard, be
used.
This machine also supports printing on 64 g/m² paper. Using such paper
containing less raw materials can lead to further saving of forest
resources.
*1: EN12281:2002 "Printing and business paper - Requirements for copy
paper for dry toner imaging processes"
xv