Advantech DS-080 series User Manual page 23

2.3.5 Mounting Bracket Installation
(1)
Using 4 pcs of M4-10L screws to mount the VESA bracket module behind the display.
Note! DS-080 is being mounted on the monitor and maximum loading is 0.8 kg
Note! Mounting plate is used to fix DS-080 in the back of the monitor.
Note! Screw size depends on the display specification. Please do check the display
manual before assembly
(2)
Find 4 pcs of M3 screws to affix the mounting brackets on system bottom. (The screws
and mounting brackets are both included in the system accessory box)
(3)
Using M3-6L screws to affix system on the VESA bracket module. (Note: Screws qty
varies by system.)
DS-080 Series User Manual
Monitor
Figure 2.14：Mounting Bracket Installation (I)
Figure 2.15：Mounting Bracket Installation (II)
23