Setup Testing - CSI Controls CS1200 Setup Manual

STEP 4: Setup Testing
1. Press and release the "TEST" button on the CS1200 WiFi Alarm. The alarm horn will sound and
the alarm light will activate while the "TEST" button is being held.
2. Verify that an alarm notification is received via all entered email or text numbers.
Note: It may take several minutes for the message to appear in your email inbox or message folder,
depending upon email server traffic or other circumstances. If you have not received a notification
within 5 minutes, verify the email address and/or cellular phone information is entered correctly and
that any email filters are set to allow messages from mywifialarm@mywifialarm.com.
While using a WiFi connection, a signal strength rating will also be sent with the alarm and power
restored notifications.
5.0 - 10.0 Great!
3.0 - 4.9 Good. No signal loss is expected.
2.0 - 2.9 Marginal. You may experience occasional signal loss.
0.0 - 1.9 Weak. Move alarm closer to wireless router.
5