Wifi Network Setup (Wps); Ethernet Network And Non-Wps Wifi Network Setup - CSI Controls CS1200 Setup Manual

STEP 1: WiFi Network Setup (WPS)
POWER WPS INTERNET
CS1200
WiFi
INDOOR ALARM SYSTEM
STEP 1: Ethernet Network and Non-WPS WiFi Network Setup
120 VAC
Replace battery yearly
CS1200
WiFi
INDOOR ALARM SYSTEM
120 VAC
Replace battery yearly
CS1200
WiFi
INDOOR ALARM SYSTEM
120 VAC
Replace battery yearly
CS1200
WiFi
INDOOR ALARM SYSTEM
120 VAC
Replace battery yearly
1. Plug in the CS1200 WiFi Alarm
power cord into a 120V receptacle.
2. Press the WPS button on your wireless
router (often on the back side of router).
3. Press the WPS button on the CS1200 WiFi
Alarm (the blue network status light will flash
continuously).
The blue network status light will illuminate
steadily when the CS1200 WiFi Alarm is
successfully connected to the wireless network.
1. Connect an Ethernet cable (not supplied)
from the CS1200 WiFi Alarm Ethernet port
to a unused network router LAN port.
2. Plug the CS1200 WiFi Alarm power cord
into a 120V receptacle.
3. The CS1200 WiFi Alarm will automatically
detect the Ethernet network and connect
upon power up.
The blue network status light will illuminate
steadily when the CS1200 WiFi Alarm is
successfully connected to the Ethernet
network.
2