Table of Contents
Advertisement
ITEM
SELECTION
Default: 4mV/Cell
3-15mV/Cell
This program is for NiMH/NiCd battery
only. When the charger detects the delta
peak value reaches the value you set,
the charger will say the battery is fully
charged.
The beep sounds at every time touching
the buttons to confirm your action. The
OFF/ON
beep or melody sounded at various times
(
during operation to alert different mode
changes.
For safety issue, when charging Lithium
batteries, you are requested to connect
OFF/ON
the balance wire of the battery to bal-
ance sockets in any modes, such as Fast
Charge, Storage Mode. This function can
be disable here.
Press ENTER to load factory default set-
ting.
It indicates the hardware and firmware
version.
SYSTEM SETTING
DESCRIPTION
19
Hide quick links:
Advertisement
Table of Contents
