Team Corally RACE 60 Instruction Manual page 14

OPERATING PROGRAM
VARIOUS INFORMATION DURING THE PROCESS
Press INC or DEC during charging or discharging process, you can inquire various informa-
tion on LCD screen .
14
R shows the number of cells detected by the charger and S is the
number of cells set by you at the previous screen. If both numbers
are identical, press START/ENTER to start charging process.
7. Charging Status Monitor
During charge process, real-time status will be showed as left screen.
Real-time status: battery type, battery cell, charge current, battery
voltage, elapsed time and charged capacity.
Voltage of each cell in the battery pack when the battery is connected
with balance lead.
Charged capacity percentage and average cell voltage of the battery
pack.
Final voltage when the program ends.
Internal temperature.
Temperature probe is needed to show external temperature
Cut off temperature
Safety timer ON and duration of time in minutes
Capacity cut-off ON and the setting value of capacity.