System Setting - Team Corally RACE 60 Instruction Manual

SYSTEM SETTING

It will be operated with the default value of the essential user settings when it is powered on
for the first time. The screen displays the following information in sequence and the user can
change the value of parameter on each screen.
When you are willing to alter the parameter value in the program, press START/ENTER to
make it blink then change the value with INC or DEC. The value will be stored by pressing
START/ENTER once.
ITEM
18
SELECTION
When you start a charge process, the
integral safety timer automatically starts
running at the same time. This is pro-
grammed to prevent overcharge the
OFF/ON
battery if it proves to be faulty, or if the
(1-720min)
termination circuit cannot detect the bat-
tery full. The value for the safety timer
should be generous enough to allow a
full charge of the battery.
This program sets the maximum charge
capacity that will be supplied to the
battery during charge. If the delta peak
OFF/ON
voltage is not detected nor the safety
(100-50000mAh
timer expired by any reason, this feature
will automatically stop the process at the
selected capacity value.
The battery's internal chemical reaction
OFF/ON
will cause the temperature of the bat-
(20°C/68°F-
tery to rise. If the temperature limit is
80°C/176°F)
reached, the process will be terminated.
You can choose the temperature dis-
Celsius
played by Celsius or Fahrenheit as you
Farenheit
like.
A rest time allowing the battery to cool
down between charging/discharging
1-60min
cycle.
DESCRIPTION