Function Key Mappings; Iq V2 Features Menu; Iq Version 2 Configuration - Psion Teklogix 9150 User Manual

First Terminal Listen Port
This parameter specifies the first port number at which the 9150 will listen for telnet
connection requests to the terminals. To enable this parameter, the value must be a
minimum of 1024. To disable the listen port, the value must be 10000. The default
value is 10000 (disabled).
6.4.6.3

Function Key Mappings

These parameters are not applicable to the RF Modem emulation.

6.5 802.IQ V2 Features Menu

This parameter accesses the 802.IQv2 sub-menu that enables the Psion Teklogix
proprietary 802.11b enhanced protocol, as described in "Psion Teklogix' 802.IQ
Protocol" on page 9. For detailed configuration information on 802.IQv1, please
refer to "802.IQ Version 1 Configuration Menu" on page 68.

6.5.1 802.IQ Version 2 Configuration

802.IQ is a Psion Teklogix proprietary optimized protocol that enables terminals to
operate on a wireless LAN in a network that supports both TCP/IP and 802.IQ
protocol simultaneously. 802.IQ protocol is available in two versions: 802.IQv1 and
802.IQv2. The 9150 can support both versions of the protocol at the same time;
terminals must use only one.
802.IQv1 protocol is a wireless LAN protocol that provides greater performance in
an 802.11b wireless network than is possible with TCP/IP. The 9150 bridges the
802.IQv1 wireless and TCP/IP wired networks.
802.IQv2 protocol is an enhanced version of the 802.IQv1 protocol that transports
packets over the UDP layer. It provides all the 802.IQv1 functionality, with the
added features of software upgrade capability over RF, the ability to add third-party
access points between controllers and terminals, and integration into the mapRF system,
if desired.
Important: 802.IQ should only be enabled on wired 9150s.
Do not configure 802.IQ on wired 9150s bridging networks, since
802.IQ beacons would be sent through the WDS link from one
network to the other (see "Wireless Distribution System (WDS)
Configuration" on page 76).
Chapter 6: Mini-Controller Configuration

802.IQ V2 Features Menu

Teklogix 9150 Wireless Gateway User Manual
201