Psion Teklogix 9150 User Manual page 124

Chapter 5: Base Station Configuration
Overview
Host
9400 Network Controller
For operation as a base station or RRM, the parameters in the Base Station Configu-
ration pages on the Configuration Main Menu screen should be set appropriately, as
described in the sections that follow. In addition, the appropriate radio and host
parameters must be applied. The radio parameters are found in the Interfaces pages
for TekLAN and Narrow Band radios. See pages 110 and 114, respectively. The host
parameters are found in the Mini-Controller Configuration: Hosts pages, which can
be found starting on page 140. See Figure 5.2 on page 109 for an overview of the
menus involved.
Note: The 9150 main parameters should first be set up as described in Chapter 3:
"9150 Main Configuration". For details on the RF protocols, see page 13.
108
Teklogix 9150 Wireless Gateway User Manual
Wireless Gateway
ETHERNET
TCP/IP
Figure 5.1 9150 Base Station/RRM Configuration
9150
9150 Wireless Gateway