Replacing The I/O Panel - Dell Studio XPS 435T / 9000 Service Manual

Back to Contents Page
Replacing the I/O Panel
Dell Studio XPS™ 435T/9000 Service Manual
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
1. Follow the procedures in Before You
2. Remove the computer cover (see
3. Remove the front panel (see
4. Remove the top cover (see
5. Disconnect the cables connected to the I/O panel from the system board.
6. Remove the two screws that secure the I/O panel to the top cover.
7. Carefully remove the I/O panel from the computer.
1 top cover
3 screws (2)
8. To replace the I/O panel, replace the screws that secures the I/O panel to the top cover.
9. Replace the top cover (see
10. Replace the cables.
11. Replace the front panel (see
12. Replace the computer cover (see
13. Connect your computer and devices to electrical outlets, and turn them on.
Back to Contents Page
Begin.
Replacing the Computer Cover).
Replacing the Front Panel).
Replacing the Top Cover).
2 I/O panel
Replacing the Top Cover).
Replacing the Front Panel).
Replacing the Computer Cover).