Alpine INE-W957A Owner's Manual page 183

When creating a new vehicle profile, first you need to select the vehicle type. Then you need
to set the following parameters. You can modify the same parameters when you edit an
existing profile:
Button
Tap this button to rename the profile for something meaningful.
Enter the average consumption of your vehicle when used in built-up
areas. The unit for consumption can be set in Regional Settings.
Enter the average consumption of your vehicle when used on
highways. The unit for consumption can be set in Regional Settings.
Select the engine and fuel type of your vehicle. This helps in
estimating the CO
Enter the average fuel price for travel cost calculation. The currency
can be set in Regional Settings.
Set the maximum speed you travel with the vehicle.
Vehicle types:
When creating a new vehicle profile, select one of the below vehicle types.
Manoeuvre restrictions and directional constraints are taken into account when
planning a route.
Roads are used only if access for cars is allowed.
Private roads and resident-only roads are used only they are inevitable to reach
the destination.
Walkways are excluded from routes.
All manoeuvres are available in intersections.
Directional constraints are taken into account the way that opposite direction is
allowed with a low speed.
A private road is used only if the destination is there.
Walkways are excluded from routes.
Manoeuvre restrictions and directional constraints are taken into account when
planning a route.
Roads are used only if access for buses is allowed.
Description
emission.
2
:
:
:
74