Unpacking And Inspection; Additional Requirements - Datamax Label Printer Operator's Manual

1.1 Unpacking and Inspection

Inspect the shipping container(s) for damage, if damage is evident
notify the shipping company to specify the nature and extent of the
damage.
Remove the printer from the packaging material and check the
contents of the package. In addition to this manual the following items
should be included:
Label printer
External power supply
Special or additional items purchased.
Note: It is a good idea to save the carton and packaging materials in the
event shipping the printer is required.

1.2 Additional Requirements

The following items are necessary to generate labels with your printer.
It may be a good idea to contact your local reseller for advice on
which media and software is best suited for your needs.
Serial or parallel cable, (see Section 1.4)
Power cord for 230 VAC operation only, (120 VAC units
come with a power cord).
Applicable media
Applicable software
2
Getting Started
Ovation 2