Troubleshooting; Opening The Web User Interface - US Robotics 9108 Quick Installation Manual

Troubleshooting

To help diagnose a problem, first use the following troubleshooting checklist.
1. Confirm that you are using the AC power adapter that came with your gateway
and that it is connected to the gateway and to an active wall outlet. Make sure
the Power switch is switched to the on position. The
2. Confirm that you have securely connected the telephone cable to the telephone
wall jack and to the gateway. The
and correctly configured DSL.
3. If you are using a wired connection from the computer to the gateway, confirm
that you have secured the Ethernet cable(s) to the computer's network
interface card and to the Ethernet port(s) on the gateway (labelled 1, 2, 3, or 4).
The corresponding
For more information on the LEDs, see the Status LEDs section earler in this document.

Opening the Web user interface

The Web user interface will be your main tool for configuring, troubleshooting and
monitoring the gateway. Follow this procedure to access it.
1. Start a Web browser.
2. Open the page http://192.168.1.1
3. A login window should appear:
The default user name and password are already filled in. Click OK.
12
LED should be lighted if you have ordered
LED should be lighted on the front of the gateway.
LED should be lighted.