Table of Contents
Advertisement
Power Cord Set
Only use a power cord approved for its intended country of operation:
U.S.A. and Canada
Denmark
Switzerland
Others
The appliance coupler (the connector to the unit and not the wall plug) must have a configuration for
mating with an EN60320/IEC320 appliance inlet.
The cord set must be UL-approved and CSA certified.
The minimum specification for the flexible cord is:
No. 18AWG
Type SV or SJ
3-conductor
The cord set must have a rated current capacity of at least 15A.
The attachment plug must be an earth-grounding type with a NEMA
5-15P (15A, 125V) or NEMA 6-15P (15A, 250V) configuration.
The supply plug must comply with section 107-2-D1, standard
DK2-1a or DK2-5a.
The supply plug must comply with SEV/ASE 1011.
The power cord shall meet local regulation requirement, if any.
3
Advertisement
Table of Contents
