Dell Latitude 13 Service Manual page 6

Dell Training Tool |
Hard Drive Cable Kit
Expand All Collapse All
Introduction
Welcome
Using This Material
Course Introduction
Product Overview
System Overview
Essential Knowledge
Software
1. Pre-Removal Instructions
Drivers
Bios Simulation
Bios Options
Diagnostic Tools
Chassis
CRU Listing
Chassis View
Field Service Information
Safety Precautions
Service Issues
Interactive Teardown
Disassembly and Reassembly
Hard Drive Cable Kit
Express Card
SD Memory Card
Bottom Base Cover
Battery
SIM Card
SIM Board
WLAN
WWAN
Audio Board / Hard Drive
Hal Sensor Board
Speaker
LED Cover
Memory
Keyboard
Card Reader Board
Coin-Cell Battery
System Board
Heat Sink / CPU Fan
Bluetooth®
Palm Rest / LCD Assembly
LCD Bezel
LCD Panel
Camera
LCD Top Cover
Appendixes
Specifications
Online Review
Document History
Document Outline
Printer-Friendly Format
Latitude 13
CAUTION:
Please follow the Safety Precautions
Technicians need to remove the following components prior proceeding to installing the hard drive cable kit:
1. Remove the Express Card
2. Remove the SD Memory Card
3. Remove the Bottom Base Cover
4. Remove the Battery
2. Establishing image.
3. Disconnect both end of the existing hard drive flex cable from the system board and hard drive connectors.
4. The hard drive flex cable is attached with a double sided tape. Peel off the cable from the system.
5. Remove the cloth tape from the card reader board edge.
NOTE:
Skip this step if the cloth tape is not there.
before removing any part from the system.
Installing The Hard Drive Cable Kit
Previous | Next