Loading Labels For The Optional Peel Mode - Avery Dennison Monarch 9855 Quick Reference

10. Close the
well until you
11. Close the cover.
Press Feed/Cut several times to feed at least three
12.
labels/tags
ribbon.

Loading Labels for the Optional Peel Mode

Peel mode must be purchased separately. In peel mode
the printer separates the backing paper from the label.
The next label is not printed until the completed one is
removed from the printer. Make sure the printer is
configured for on-demand mode and the correct suppl
type. The minimum feed length is 1.5 inches for pee
mode. Hold the leading edge of peeled labels when
printing on stock longer than six inches.
You must use non-perforated supplies for peel mode.
Follow the steps for loading supplies from the previous
section. Then, follow these steps after you close the
pr thead. in
Remove the labe
1.
backing paper.
6
printhead by pressing down on the thu
hear it click into place.
to properly position the supply and the
ls from the first 10 inches of the
mb
,
y
l