Display Panel; Replacing The Display Bezel; Removing The Display Panel - Dell Inspiron 9200 Service Manual

Hide thumbs Also See for Inspiron 9200:

Table of Contents

tabs

7. Repeat

step 6

for the left corner of the bezel. Then use your fingers to release the snaps around the rest of the bezel and lift it away from the cover.

1. Starting at any corner, use your fingers to gently snap the bezel in place securing the display panel.

2. Replace the six M2.5 x 5-mm screws on the front of the bezel.

3. Replace the two shoulder screws and two screw covers.

4. Replace the six display bumpers around the display assembly.

Display Panel

CAUTION:

Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide.

NOTICE:

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer.

NOTICE:

To avoid damaging the system board, you must remove the main battery before you begin working inside the computer.

1. Follow the instructions in

"Before Working Inside Your

2. Remove the

display

assembly.

Remove the display bezel.

4. Remove the M2 x 3-mm ground screw that attaches the display-panel ground wire to the back display cover.

Computer."

Table of Contents

Show Quick Links

Table of Contents