Controlling Load Segments Through the Display
To control the load segments through the display:
Press the
button for longer than one second to go to the main menu selection and scroll down to
1
the Control menu using the
Press the
button to enter the Control menu.
2
Use the
button to scroll to Load Segments.
3
Press the
button.
4
The current setting for the option flashes when selected.
Select the desired load segment using the
5
Set the desired load segment ON or OFF using the
6
Press the
button for longer than one second to confirm.
7
Set the other load segment if applicable.
8
Configuring Automatic Start Delay
You can configure a load segment to turn on automatically after the utility power returns, if it was shut
down by:
S The
button
S An external command with auto-restart option
S Battery under voltage state
S Automatic on battery shutdown command
You can specify the restart delay time for each load segment: select zero seconds (0s is the default) to
restart immediately, select 1–32767 seconds to delay for the specified time, or select Off.
To set the restart delay times for each load segment:
Press the
button for longer than one second to go to the main menu selection and scroll down to
1
the Settings menu using the
Press the
button to enter the Settings menu.
2
Use the
button to scroll to the Automatic Start Delay option and press the
3
The current setting for the option flashes when selected.
Set the restart delay for one load segment using the
4
|
58
Operation
button.
and
buttons.
button.
button.
and
buttons.
button.