Configuring Load Segments; Controlling Load Segments Through The Display - Dell Online Rack 5600R OL HV-US User Manual

Configuring Load Segments

Load segments are sets of receptacles that can be controlled by the Dell UPS Management Software,
the Dell Network Management Card, or through the LCD display, providing an orderly shutdown and
startup of your equipment. For example, during a power outage, you can keep key pieces of equipment
running while you turn off other equipment. This feature allows you to save battery power.
Each Dell Online Rack model has two configurable load segments. See "UPS Rear Panels" on page 15
for the load segment locations.
To control the load segments with power management software, see your power management software
manual for details (refer to the Software CD or www.dell.com for the latest information).

Controlling Load Segments Through the Display

To control the load segments through the display:
1
Press the button for longer than one second to go to the main menu selection and scroll down to
the Control menu using the
2
Press the button to enter the Control menu.
3
Use the button to scroll to Load Segments.
4
Press the button.
The current setting for the option flashes when selected.
5
Select the desired load segment using the
6
Set the desired load segment ON or OFF using the
7
Press the button for longer than one second to confirm.
8
Set the other load segment if applicable.
button.
and buttons.
button.
|
49
Operation