NOTE:
At initial startup, input voltage auto-sensing is enabled by default. After the subsequent startup,
auto-sensing is disabled until manually re-enabled by output voltage setting.
UPS Rear Panels
This section illustrates the rear panels of the three Dell Online Rack 10 kW UPS model options.
DELL10KWOLHVUS
UPS Communication
Bay
One NEMA
L6-30R Outlet
Two Output
Circuit Breakers
Load Segment 1 (LS1)
Figure 24. 10 kW, 208V (DELL10KWOLHVUS) Rear Panel
|
34
Installation
RS-232
REPO
USB
Port
Port
Ports
Two IEC 320-C19
One NEMA
Outlets
L6-30R Outlet
Two Output
Circuit Breakers
EBM
Connector
Two IEC 320-C19
Outlets
Load Segment 2 (LS2)
Ground
Screw
Input Terminal
Block