Silencing The Alarm - Dell DELL10KWOLHVUS User Manual

Table 17. Alarms, Notices, and Events
Alarms, Notices, and Events
UPS On Command
(Event 172)
No Alarm
UPS Off Command
(Event 173)
No Alarm
UPS Control Power On
(Event 181)
No Alarm
UPS System Normal
(Event 237)
No Alarm

Silencing the Alarm

Press any button on the control panel to silence the alarm. Check the alarm condition and perform the
applicable action to resolve the condition. If any new alarm becomes active, the audible alarm resumes,
overriding the previously silenced alarm.
|
92
Troubleshooting
Possible Cause
A remotely issued UPS start up
command (On command) was
received from the software. It
indicates a manually requested
transition from Standby to
Online mode. This event is not
triggered for auto restarts.
A remotely issued UPS
shutdown command (Off
command) was received from
remote software. It causes the
UPS to open all output relays
and shed the load.
The UPS processor powered up,
either from battery or utility
power (in Standby or Online
mode).
The UPS is in a normal mode of
operation and no alarms are
active.
Action
None.
None.
None.
None.