Ositech comm Trumpcard Data/Fax Modem User's Manual And Reference page 58

Section Four
STORED PROFILE 1:
B1 E1 L2 M1 N1 V1 W0 X4 Y0 &C0 &D0 &G0 &JO &K3 &Q5 &R0
&S0 &T4 &X0
S00:000 S02:043 S06:002 S07:030 S08:002 S09:006 S10:014
S11:095 S12:050 S18:000 S36:005 S37:000 S40:105 S41:135
S46:138 S95:000
TELEPHONE NUMBERS:
0= 1=
2= 3=
&Wn — Store User Profile
Parameters
Default
Saves the current configuration into non-volatile memory as one of two
user profiles. These settings are restored to the active configuration upon
receiving an Zn command or at power up (see &Y command). The user
profile saved is denoted by the parameter value. This command will yield
an ERROR message if unable to store the current configuration in non-
volatile memory.
Examples
AT&W0
AT&W1
&Yn — Designate Default User Profile
Parameters
Default
Designates which of two user profiles will be loaded into the active
configuration at power up. The user profile is denoted by the parameter
value.
Examples
AT&Y0
AT&Y1
4 - 26
0 or 1
none
Save as user profile 0
Save as user profile 1
0 or 1
0
Selects user profile 0
Selects user profile 1
Trumpcard 14400/28800 Modem