Re-Dialling The Last Number; Storing A Number; Connection Messages - Ositech comm Trumpcard Data/Fax Modem User's Manual And Reference

Re-Dialling the Last Number

To re-dial the last number you called, enter:
ATDL [ENTER]

Storing a Number

If there are some numbers that you call regularly, you may want to store
them so that you do not have to enter the whole number every time you
call. You can store up to four numbers (in locations 0-3). Each number can
be up to 36 characters long.
To store the number 1-999-555-1212 in storage location 3, enter:
AT&Z3=19995551212 [ENTER]
Dialling a Stored Number
To dial 1-999-555-1212 (that you stored as number 3), enter:
ATDS=3 [ENTER]

Connection Messages

Once you connect to the remote Modem, your Modem will respond with
one of the following messages. (If the remote Modem responds with
garbled characters or seems to have locked up, refer to Setting Up For a
Non-Error Correcting Connection before you try again.)
The Modem may respond with a short form (numeric code) or a long form
(prompt). Refer to the ATXn command description in Section Three to
control how the Modem responds.
Short
Form
0
1
2
3
4
5
6
7
8
9
10
11
User's Guide and Reference
Long
Form
OK
CONNECT
RING
NO CARRIER
ERROR
CONNECT 1200
NO DIAL TONE
BUSY
NO ANSWER
CONNECT 0600
CONNECT 2400
CONNECT 4800
Basic Modem Operation
Description
command successful
connection at 300 bps
incoming call
no carrier detected
invalid command
connection at 1200 bps
no dial tone detected
remote Modem line is busy
remote Modem did not answer call
connection at 600 bps
connection at 2400 bps
connection at 4800 bps
4 - 5