Indoor Unit Control - Mitsubishi PK18FL3 User Manual

2. INDOOR UNIT CONTROL

2-1COOL operation
COOL
FAN
AM
ON/OFF TEMP
FAN AUTO STOP
MODE VANE AUTO START
CHECK LOUVER
TEST RUN min
SET RESET CLOCK
<COOL operation time chart>
ON
Thermostat
OFF
ON
Indoor fan
OFF
ON
Auto vane
OFF
ON
Compressor
OFF
w1 Even if the room temperature rises above the set temperature during this period, the compressor will not start until
this period has ended.
˚F
h
Operation starts by Room temperature
POWER button becomes equal to
ON. set temperature.
LOW or HIGH
Depends on remote controller setting
CLOSE
OC275-21
<How to operate>
1 Press POWER ON/OFF button.
2 Press MODE button to set operation mode to COOL.
3 Set desired temperature with
NOTE: 1. Set temperature changes by 2 °F in the range 65~87 °F
each TEMP
2. Set temperature is displayed on the LCD.
Room temperature
rises above set
temperature.
LOW or HIGH
MIN. 3 minutes w1
or button.
or button is pressed.
Operation stops by
POWER button
OFF.
CLOSE