Vario Proximity Card Reader Quick Start Guide Mounting template sticker For more information on the Vario Proximity Card Reader and other Integrated Control Technology products please visit the ICT website (http://www.incontrol.co.nz). 1.1 Document Conventions Indicates a warning or cautionary message...
Connect the wiring to the Vario Reader electronics, then use the top case to press gently on the bottom mounted case until you hear the clip snap into place. PRX-VARIO Vario Proximity Card Reader Installation Manual | November 2012...
Connect the reader shield to a suitable earth point. DO NOT connect the shield to a ground or AUX connection. DO NOT connect the shield wires together at the reader cable splice. With the shield wire already terminated at the reader terminate the shield at the controller. PRX-VARIO Vario Proximity Card Reader Installation Manual | November 2012...
Connect the reader shield to a suitable earth point. DO NOT connect the shield to a ground or AUX connection. External Button Input Mode and single LED operation must be enabled when using this wiring configuration. PRX-VARIO Vario Proximity Card Reader Installation Manual | November 2012...
Auxiliary Button Input Mode Vario Proximity Card Operating Mode Add Standalone Master Card Vario Proximity Card RS-485 Address Door Pre-Alarm Time Door Left Open Time Version Information Default Client Code Configuration PRX-VARIO Vario Proximity Card Reader Installation Manual | November 2012...
Function Read all card types ICT Prox Format Postech Format HID Format ICT and HID Format ICT and Postech Format Postech and HID Format 5.5 Address 2 - Data Inferface The data interface format defines how the data is sent using the DO and D1 data interface.
Request to Exit and Request to Enter buttons. Enabling the external button input mode requires the Vario Proximity Card to be configured in Single LED Mode operation. Setting Function Disabled Enabled PRX-VARIO Vario Proximity Card Reader Installation Manual | November 2012...
When selecting Address 8 the address must be between 1 and 128. The addressing in the Vario Proximity Card Reader is 0 indexed, 1 badge of the card is equal to Address 0 (Default). Setting Function Address 0 Address 1 Address 2 Address 127 PRX-VARIO Vario Proximity Card Reader Installation Manual | November 2012...
Selecting Address 12 will default the Vario Proximity Card Reader to the factory defaults indicated in this manual and it will reset all standalone users. Defaulting the Vario Proximity Card Reader will immediately restart the unit and exit programming mode. PRX-VARIO Vario Proximity Card Reader Installation Manual | November 2012...
The Vario Proximity Card Reader can be configured to operate in a high security mode locking the reader and cards to a specific client code. Once this address has been selected you must present a valid ICT Client Programming card to set client code for the Vario Proximity Card Reader.
Vario Proximity Card. The Vario Proximity Card will emit two beeps to indicate it has programmed the User in the next available location. PRX-VARIO Vario Proximity Card Reader Installation Manual | November 2012...
To effectively manage users on the Vario Proximity Card Reader we recommend that the Nano Prox Access Manager application is used. PRX-VARIO Vario Proximity Card Reader Installation Manual | November 2012...
Mechanical Diagram The mechanical diagram shown below outlines the essential details needed to help ensure the correct installation of the Vario Reader. Power/Status LED ICT Logo ICT Logo Cable Loom PRX-VARIO Vario Proximity Card Reader Installation Manual | November 2012...
The dimensions shown below outlines the essential details needed to help ensure the correct installation of the Vario Reader. Height: 118mm Depth: 20mm (4.64in) (0.78in) Width: 77mm (3.03in) Height: 118mm Depth: 20mm (4.64in) (0.78in) Width: 77mm (3.03in) PRX-VARIO Vario Proximity Card Reader Installation Manual | November 2012...
Integrated Control Technology continually strives to increase the performance of its products. As a result these specifications may change without notice. We recommend consulting the ICT website (http://www.incontrol.co.nz) for the latest documentation and product information.
10 Ordering Information Please use the following product codes when placing an order for the Vario Proximity Card Reader. PRX-VARIO Manuals and additional literature are available on the ICT Website (http://www.incontrol.co.nz) under the Support section. PRX-VARIO Vario Proximity Card Reader...
ICT's obligation and liability under this warranty is expressly limited to repairing or replacing, at ICT's option, any product not meeting the specifications. In no event shall ICT be liable to the buyer or any other person for any loss or damages whether direct or indirect or consequential or...