Power Supply; Compact Disc Operation - Roadstar KID-55CD Instruction Manual

POWER SUPPLY

• Remove the stereo carefully from the box, retaining the packaging for future use.
•
Please read this instruction book carefully before operating this unit.
Using AC adapter (not included)
Make sure the local voltage corresponds to the adapter's voltage.
- Use adapter of dc 9V/1000mA output with the negative pole to the center pin.
- Connect the adapter to the dc 9V input jack of the CD player and to the wall socket.
Specification of adapter:
Input Voltage: AC100-240V 50/60Hz
Output Voltage: DC 9V 1000mA
CAUTION:
When using optional AC adapter, it must comply with the specifications of CEE
publication 15. Charging unit to be used with toy should be regularly examined for
potential hazard as damage to the cable or cord, plug, enclosure of other parts and
that, in the event of such damage, the toy must not be used. Transformers used with
the toy are to be regularly examined for damage to the cord, plug, enclosure of other
parts and that, in the event of such damage, the toy must not be used with this
transformer until the damage has been repaired.
• Warning! Not suitable for children under 36 months. Electric shock hazard.
• The toy shall only be used with a transformer for toys.
• The transformer is not a toy.
• Toys liable to be cleaned with liquid are to be disconnected from the transformer
before cleaning.
• The toy is not to be connected to more than the recommended number of power
supplies.
Battery Operation
Using Batteries (not included)
Unscrew and remove the battery door.
Insert 6 "C" size / UM-2 / R14 batteries
(not included) - alkaline batteries recom-
mended, with the correct polarities as indicated.
Replace the battery door and screws.
English
Note: The transformer is not a toy.
English
3 4
• Non-rechargeable batteries are not to be recharged.
• Exhausted batteries are to be removed from the toy.
• The supply terminals are not to be short-circuited.
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium)
batteries.
• Do not use rechargeable batteries.
• Only batteries of the same of equivalent type as recommended are to be used.
• Batteries are to be inserted with the correct polarity.
• Replacement of batteries must be done by adult.
• Rechargeable batteries are to be removed from the toy before being charged
• Rechargeable batteries are only to be charged under adult supervision

COMPACT DISC OPERATION

• To remove a disc from its storage case, press down on the centre of the case and lift the
disc out, holding it carefully by the edges.
• Fingerprints and dust should be carefully wiped off the disc's recorded surface with a soft
cloth. Unlike conventional records, compact discs have no grooves to collect dust and
microscopic debris so gently wiping with a soft cloth should remove most particles. Wipe in
a straight line from the inside to the outside of the disc. Small dust particles and light stains
will have absolutely no effect on reproduction quality.
• Never use chemicals such as record sprays, antistatic sprays, benzine, or thinners to clean
compact discs. These chemicals can irreparably damage the disc's surface.
• Discs should be returned to their cases after use. This avoids serious scratches that could
cause the Laser pickup to skip.
• Do not expose discs to direct sunlight, high humidity, or high temperatures for extended
periods. Long exposure to high temperatures can warp the disc.
• Do not stick paper or write anything with a ballpoint pen on the label side of the disc.
Playing a CD
• Open the CD door by pressing OPEN.