Locations Of Controls; Power Supply; Auto Power Off - Roadstar PCD-435NCD User Manual

1 English

LOCATIONS OF CONTROLS

1. LCD DISPLAY
2. PLAY/PAUSE
3. STOP
4. SKIP -
5. SKIP +
6. PROGRAM
7. MODE
8. OPEN
9. CD DOOR
10. VOLUME KNOB
11. HEADPHONES OUT
12. DC INPUT JACK
13. BATTERY COMPARTMENT

POWER SUPPLY

Use with regular batteries
1. Open the battery compartment door, located on the bottom of the unit, by sliding
the door and lift it up. (Do not remove the battery door);
2. Insert 2 x 1.5V /UM-3/AA size alkaline batteries, following the correct polarity, as
indicated in the battery compartment;
3. Close the battery compartment door.
Notes: If the symbol "LOW BATTERY" appears in the display, batteries are weak and
ought to be replaced.
Use with AC/DC adaptor (not included)
1. Insert the DC plug, at the end of the AC/DC adaptor cord, into the DC 5 V INPUT
socket (12) located on the back of the unit;
2. Connect the AC/DC adaptor into a 100-240V ~ 50-60 Hz AC power outlet.
Notes:
If the AC adaptor is connected when regular batteries are installed, the power

supply automatically switches to the AC power source.
Use only the supplied AC/DC adaptor. Using other types of adaptor may da-

mage the unit.
Make sure that the AC/DC adaptor matches with your household voltage befo-

re connecting it into the wall outlet.
When not using AC power, disconnect the AC/DC adaptor from the wall outlet.

Do not touch the AC/DC adaptor with wet hands.

AUTO POWER-OFF
When the unit is stopped for approximately 30 seconds, the Auto Power Off function
will activated and turn the unit off automatically.