Safety Pre Cau Tions - Maple Systems Ivory Series Installation And Operation Manual

6
vibration or shocks. Do not install the computer in enclosures with rapid temperature variations or high humidity.
Either will cause condensation of water inside the device and eventual damage to the computer.

Safety Pre cau tions

Please observe the following precautions when installing the Ivory Series Panel PCs. Failure to comply with these
restrictions could result in loss of life, serious personal injury, or equipment damage.
Warning:
or spray detergents for cleaning. Use a damp cloth.
Warning:
Warning:
overheating. DO NOT COVER THE OPENINGS.
Warning:
equipment to the power outlet.
Warning:
over the power cord.
Warning:
to avoid damage by transient over-voltage.
Warning:
Warning:
only by a qualified service technician.
Warning:
service personnel
DO NOT LEAVE THIS EQUIPMENT IN AN UNCONTROLLED ENVIRONMENT WHERE
THE STORAGE TEMPERATURE IS BELOW - 20°C (-4° F) OR ABOVE 60°C (140° F). IT
MAY DAMAGE THE EQUIPMENT.
1010-1010, Rev 02
Disconnect this equipment from any AC outlet before cleaning. Do not use liquid
Keep this equipment away from humidity.
The openings on the enclosure are for air convection. Protect the equipment from
Make sure the voltage of the power source is correct before connecting the
Position the power cord so that people cannot step on it. Do not place anything
If the equipment is not used for a long time, disconnect it from the power source
Never pour any liquid into an opening. This could cause fire or electrical shock.
Never open the equipment. For safety reasons, the equipment should be opened
If any of the following situations arise, get the equipment checked by qualified
• The power cord or plug is damaged.
• Liquid has penetrated into the equipment.
• The equipment has been exposed to moisture.
• The equipment does not work well, or you cannot get it to work according to the
installation reference guide.
• The equipment has been dropped and damaged.
• The equipment has obvious signs of breakage.
Ivory Se ries In stal la tion & Op er a tion Man ual