Audible Indicator; Data Port; Battery Compartment - Abbott FreeStyle Precision Pro Operator's Manual

Audible Indicator

The meter has an audible indicator that can be turned on or off. This indicator emits two tones, a high pitched tone to indicate
success and a low pitched tone to indicate a problem. If enabled, the meter will beep to indicate the following actions:
• The operator has successfully scanned a barcode;
• The meter has detected an adequate sample and is starting test analysis;
• The meter is nearing completion of test analysis (3 beeps with final countdown);
• The meter has displayed the test result;
• An error has occurred (see Chapter 11 for troubleshooting information);
• The meter will automatically shut off in thirty seconds (2 beeps);
• The operator has pressed an unexpected button;
• The operator has pressed the On/Off button.

Data Port

The data port is located at the bottom of the meter. This port enables the meter to automatically transfer the data through a cable
or docking station to the data management system. Data may be transferred through a cable or docking station even if the meter
is wireless enabled.

Battery Compartment

The meter holds two AA batteries to power the meter.
Questions? Refer to Page 11-22 For Technical Support Instructions.
2-5
Chapter 2: Using the Meter