Table Of Contents; Operation To Reset - Kenwood R-SG7 Service Manual

R-SG7/SG7G
Contents
CONTENTS / ACCESSORIES .................................. 2
CIRCUIT DESCRIPTION ............................................3
ADJUSTMENT ............................................................7
PC BOARD ................................................................ 8
Accessories
AM loop antenna (1)
(T90-0833-05)
Audio cords (2)
(E30-0615-05)
Remote control unit (1)
(A70-1154-05) : M . . . . . . . RC-SE9
(A70-1155-05) : TE . . . . . . . RC-SE9(E)

Operation to reset

The microcomputer may fall into malfunction (impos-
sibility to operate, erroneous display, etc.) when the
power cord is unplugged while power is ON or due to
an external factor. In this case, execute the following
procedure to reset the microcomputer and return it
to normal condition.
÷ Please note that resetting the microcomputer clears the
contents stored in it returns it to condition when it left the
factory.
2
CONTENTS / ACCESSORIES
AM loop antenna stand (1)
(J19-3645-05)
System control cord (1)
(E30-2628-05)
SCHEMATIC DIAGRAM .......................................... 11
EXPLODED VIEW ....................................................22
PARTS LIST..............................................................23
SPECIFICATIONS ......................................Back cover
FM indoor antenna (1)
(T90-0801-15) : M
(T90-0809-05) : ET
AC plug adaptor (1)
(E03-0115-05)
Battery cover (A09-0356-08)
R-SG7
Pull the power plug from the receptacle, and then plug
it in again while keeping the "on/standby" key pressed.
Batteries (R6/AA) (2)