Maintenance Before Long Term Storage - Brother GT-3 Series Maintenance Manual

MAINTENANCE BEFORE LONG TERM STORAGE

C M Y K
Side
W W W W
Side
C M Y K
Side
W W W W
Side
341 MODE
> NEVER CHANGE MACHINE MODE TO 341 MODE WHEN WHITE HEADS ARE IN THE MACHINE!
In 341 mode, the white heads will not be purged automatically.
This means that the wiper will do his job in dry condition.
THIS WILL DAMAGE ALL WHITE PRINT HEADS WITH NO WARRANTY !
> 341 Mode should only be used when white printheads are NOT installed.
Maybe just at installation, when customer decides to use white ink much later
CONTACT DETAILS OF BROTHER DEALER
Company Name:
Representative:
Email address:
Phone number:
13
> If printer is only used for Color printing [no White]
Preparation for Storage
NONE
NONE
+ in any case, clean the CLP of all Print Heads before storage!
+ clean Wiper Blades & rubber Caps
> If printer will NOT work at all, for more than 2 weeks
Preparation for Storage
Color Tube Cleaning
+ Clean the Caps & Wipers
White Tube Cleaning
+ Insert Capping Cartridges
MAINTENANCE FOR LONG TERM STORAGE
Daily Maintenance
NONE
NZC
Print W. Nozzle Check
[see page 4]
Load Maintenance Solution in White tubes*
* via Load White and MNT Cartridge with MNT solution instead of White ink cartridge
HOW TO CONTACT MY DEALER ;-)
CONTACT DETAILS OF BROTHER DEALER
Only
Regular maintenance
NONE
White Tube Cleaning
> once a Week !
[see page 10]
+ insert new Wiper Cleaners
Every 2 Weeks
Clean the Caps & Wipers
+ Load Wash Liquid in Caps
+ Capping Cartridges
C M Y K
[see page 7]