Table of Contents
Advertisement
MAINTAINANCE
BEFORE EACH USE
1. Inspect the jigsaw, the trigger switch, the cord and the accessories for damage.
2. Check for damaged, missing, or worn parts.
3. Check for loose screws, misalignment or binding of moving parts, or any other condition
that may affect the operation.
4. If abnormal vibration or noise occurs, turn off the tool immediately and have the
problem corrected before further use. Unplug the tool from power source before cleaning
or performing any maintenance. Using compressed air may be the most effective
cleaning method. Always wear safety goggles when cleaning tools using compressed air.
WARNING!
•
Do not allow brake fluids, gasoline and petroleum-based products, penetrating oil, etc. come into
contact with plastic parts. These substances contain chemicals that can damage, weaken, or
destroy plastic.
•
When servicing, use only identical replacement parts. The use of any other parts may create a
hazard or cause damage to the product.
•
Use only accessories that are recommended for this jigsaw by the manufacturer. Accessories that
may be suitable for one tool may become hazardous when used with another tool.
•
Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained tools with sharp
cutting edges are less likely to bind, and are easier to control.
•
To ensure safety and reliability, all repairs should be performed by a qualified service technician.
•
If the replacement of the supply cord is necessary, this has to be done by the manufacturer or his
agent in order to avoid a safety hazard.
13
Advertisement
Table of Contents
