Advertisement
CL 10
Time and Calendar Set
- Move the FUNCTION switch (5) to T.SET (TIME SET ), hour part is
blinking; press UP (7) or DOWN key (9) to set the hour. (Be careful to
set AM or PM correctly. When the PM time is set under 12-hour
mode, a 'PM' mark will be on display.)
- Press MODE key (8), minute part is blinking; press UP (7) or DOWN
key (9) to set the minute.
- Press MODE key (8), year part is blinking; press UP (7) or DOWN key
(9) to set the year (from 2002-2099).
- Press MODE key (8), month part is blinking; press UP (7) or DOWN
key (9) to set the month.
- Press MODE key (8), date part is blinking; press UP (7) or DOWN key
(9) to set the date.
- Move the FUNCTION switch (5) to NORMAL, the time and calendar
settings are finished.
Alarm Set
- Move the FUNCTION switch (5) to AL.SET (ALARM SET ), hour part is
blinking; press UP (7) or DOWN key (9) to set the alarm hour. (Be
careful to set AM or PM correctly.)
- Press MODE key (8), minute part is blinking; press UP (7) or DOWN
key (9) to set the alarm minute.
- Press MODE key (8) again, the snooze interval minute is blinking;
here you can set snooze interval from 1 to 60 minutes by pressing UP
(7) or DOWN key (9). You can ignore this step; the default snooze
interval is 1 minute.
- Move the FUNCTION switch (5) to NORMAL, the alarm setting is
finished.
Advertisement
