Procedure For Tilting Down (Manual Tilt Models) - Yamaha 20D Owner's Manual

3. Place the tilt lock lever (if equipped) in
the release/up position.
4. Pull up the shallow water lever (if
equipped).
5. Hold the rear of the top cowling with one
hand and tilt the engine up fully.
6. Push the tilt support knob into the clamp
bracket. Or the tilt support bar will turn to
the lock
NOTICE: Do not use the tilt support
ZMU03725
ZMU03726
ZMU04123
position automatically.
lever or knob when trailering the
boat. The outboard motor could
shake loose from the tilt support and
fall. If the motor cannot be trailered in
the normal running position, use an
additional support device to secure it
in the tilt position. For more detailed
information, see page 50.
EMU28022
Procedure for tilting down (manual
tilt models)
1. Place the tilt lock lever in the release/
down position or return the shallow wa-
ter lever to its original position.
2. Slightly tilt the engine up until the tilt sup-
port bar is automatically released.
3. Slowly tilt the engine down.
Operation
[ECM01641]
ZMU03747
ZMU03731
47