Yamaha YZF-R6 Owner's Manual page 20

INSTRUMENT AND CONTROL FUNCTIONS
If the warning light does not come on
initially when the key is turned to "ON",
or if the warning light remains on, have
a Yamaha dealer check the electrical
circuit.
3
TIP
This model is also equipped with a self-
diagnosis device for the fuel level de-
tection circuit. If a problem is detected
in the fuel level detection circuit, the
following cycle will be repeated until
the malfunction is corrected: The fuel
level warning light will flash eight times,
and then go off for 3.0 seconds. If this
occurs, have a Yamaha dealer check
the vehicle.
Coolant temperature warning
light " "
This warning light comes on if the en-
gine overheats. If this occurs, reduce
the load on the engine immediately. If
message "HI" flashes in the coolant
temperature display, stop the vehicle,
then stop the engine and let the engine
cool.
The electrical circuit of the warning
light can be checked by turning the key
to "ON". The warning light should
come on for a few seconds, and then
go off.
If the warning light does not come on
initially when the key is turned to "ON",
or if the warning light remains on, have
a Yamaha dealer check the electrical
circuit.
NOTICE
Do not continue to operate the en-
gine if it is overheating.
TIP
 For radiator-fan-equipped vehi-
cles, the radiator fan(s) automati-
EAU1142D
cally switch on or off according to
the coolant temperature in the ra-
diator.
 If the engine overheats, see page
6-47 for further instructions.
ECA10022
3-5