Handlebar Switches - Yamaha YZF-R6 Owner's Manual

Handlebar switches

Left
1. Pass switch " "
2. Dimmer switch " / "
3. Turn signal switch " / "
4. Horn switch " "
5. Hazard switch " "
INSTRUMENT AND CONTROL FUNCTIONS
Right
EAU1234F
1. Engine stop switch "
2. Start switch " "
Pass switch "
Press this switch to flash the headlight.
Dimmer switch "
Set this switch to "
beam and to " " for the low beam.
Turn signal switch "
To signal a right-hand turn, push this
switch to " ". To signal a left-hand
turn, push this switch to "
released, the switch returns to the cen-
3-14
ter position. To cancel the turn signal
lights, push the switch in after it has re-
turned to the center position.
Horn switch "
Press this switch to sound the horn.
Engine stop switch "
Set this switch to "
the engine. Set this switch to "
/ "
stop the engine in case of an emergen-
cy, such as when the vehicle overturns
EAU12351
or when the throttle cable is stuck.
"
Start switch "
EAU12401
Push this switch to crank the engine
/ "
with the starter. See page 5-1 for start-
" for the high
ing instructions prior to starting the en-
gine.
EAU12461
/ "
The engine trouble warning light will
come on when the key is turned to
"ON" and the start switch is pushed,
". When
but this does not indicate a malfunc-
tion.
EAU12501
"
3
EAU12661
/ "
" before starting
" to
EAU12713
"
EAU41701