Checking The Start Switch - Yamaha WR450F(Y) 2009 Owner's Service Manual

CHECKING THE START SWITCH

1. Inspect:
• Start switch conduction
Tester (+) lead → Black lead "1"
Tester (-) lead → Black lead "2"
Result
Conductive (while the
start switch is pushed)
Not conductive while it is pushed →
Replace.
Conductive while it is freed → Re-
place.
Set the tester selection position to "Ω
× 1".
2. Inspect:
• Rubber part "a"
Tears/damage → Replace.
ELECTRIC STARTING SYSTEM
7-9