Engine Stop Lanyard Switch - Yamaha 25B Owner's Manual

EMU00931

ENGINE STOP LANYARD SWITCH

q
(for Tiller control model)
The lock-plate 1 must be attached to the
engine stop lanyard switch for the engine to
run. The lanyard 2 should be attached to a
secure place on the operator's clothing, or
w
arm or leg. Should the operator fall over-
board or leave the helm, the lanyard will pull
000651
out the lock plate, stopping ignition to the
engine. This will prevent the boat from run-
ning away under power.
w
8 Attach the lanyard to a secure place on
8 Do not attach the lanyard to clothing
8 Avoid accidentally pulling the lanyard
NOTE:
The engine cannot be started with the lock-
plate removed.
2-4
your clothing, your arm or leg while
operating.
that could tear loose. Do not route the
lanyard in such a way that it could
become entangled, preventing it from
functioning.
during normal
engine power means the loss of most
steering control. Also, without engine
power, the boat could slow rapidly. This
could cause people and objects in the
boat to be thrown forward.
GB
operation. Loss of